VANCOUVER, BRITISH COLUMBIA--(Marketwired - Apr 2, 2013) - Alphamin Resources Corp(TSX VENTURE:AFM) ("Alphamin" or the "Company") is pleased to announce that a second phase of diamond drilling will commence on its flagship Bisie Prospect at its Bisie Tin Project in North Kivu Province, east central Democratic Republic of Congo (DRC) in April 2013. Initially one drill rig will be used, with a second rig expected on site early in the second Quarter. An infill drilling programme of 23 drill holes for 3000m has been designed to follow up on excellent tin results reported from the Gecomines target area during the first phase of drilling. The programme will test mineralisation over a strike length of 275m down to a vertical depth of 200m and will enable the Company to release its first maiden resource estimate at Gecomines.
Significant results reported from the initial drilling programme at Gecomines included:
-
BGC001: 12m @ 3.15% Sn from 53m, including 3m @ 6.14%
Sn from 80m
-
BGC002: 25.85m @ 2.26% Sn from 47.65m including 11m @ 4.75%
Sn from 62.5m
-
BGC005: 23.5m @ 0.85% Sn from 111.5m including 5.5m @ 2.27%
Sn from 122m
-
BGC006: 10.3m @ 0.98% Sn from 65.7m including 1.8m @ 3.12%
Sn from 65.7m and6.7m @ 1.11% Sn from 82.3m
-
BGC007: 18.5m @ 2.21% Sn from 53m including 2.9m @ 6.27%
Sn from 67.5m and 1.1m @ 6.23% Sn from 80m
Significant copper and light rare earth mineralisation (cerium and lanthanum) was intersected in all drill holes with a best intercept of 9.4m @ 1.01% Cu from 67m in BGC002.
Tin mineralisation has been defined over 500m in the Golgotha target area to the south (Figure 1) but generally has a lower overall tenor than the mineralisation at Gecomines. A second zone rich in zinc, lead and silver was also identified adjacent to or coincident with the tin zone at Golgotha. Copper and light rare earth mineralisation is closely associated with both tin and base metal mineralisation.
The mineralisation at Golgotha is associated with a 2.5km zinc in soil anomaly, shown in Figure 2. The Company has plans to first conduct an Induced Potential (IP) geophysical survey to better define drilling targets in the Golgotha target area before commencing with further drilling. For this reason the Company has decided to fast track a resource drilling programme at Gecomines before continuing to drill at Golgotha.
Petrological studies indicate mineralising fluids originated from late stage magmatic fluids derived from a nearby granite intrusive body exposed to the west of the Bisie ridge. The granitic body has not been intersected in any of the holes drilled to date implying that mineralisation at Bisie is likely to continue at considerable depths to 150m from surface.
Background
The Bisie project is located in the Walikale district of North Kivu Province, DRC and is held by Alphamin's 100% owned Mining and Processing Congo sprl (MPC). MPC holds a total of five tenements covering an area of 1,470sqkm with significant tin, gold and base metal potential. The key prospects within the Bisie Project are the Bisie Tin Prospect mined previously by artisanal means and the Omate gold workings exploited historically by the Belgians and currently mined extensively by artisanals.
The Bisie Prospect was the DRC's largest producer of tin ore for a number of years and accounted for up to 75% of the DRC's tin output.
Alphamin lifted force majeure on PR5266 which hosts the Bisie Prospect in February 2012 and commenced diamond drilling during the second half of 2012 at two target areas, Gecomines and Golgotha, mined extensively by artisanal miners. Significant high grade tin mineralisation was reported from drilling at both target areas. The tin mineralisation is also closely associated with copper and light rare earth (cerium and lanthanum) mineralisation as well massive and disseminated lead and zinc sulphides and significant amounts of silver.
Although tin does not respond to geochemical soil sampling due to its immobility, results from recent soil sampling programmes have highlighted lead and zinc in soils for a further 2km to the south of the Golgotha workings suggesting tin mineralisation can be expected for at least 2km to the south of Golgotha. The lead and zinc in soil anomaly has been defined over a minimum of 4km along the Bisie ridge and remains open to the south where the soil sampling has not been completed.
High grade mineralisation at Bisie appears to be controlled by a series of crosscutting northeast or east-west trending faults identified along the ridge from landsat imagery. The Company is therefore highly confident of discovering new high grade zones of tin and base metal mineralisation from systematic exploration along the ridge.
Mineralisation at Bisie is from surface on a ridge which lies at least 200m above the surrounding countryside and therefore highly amenable to open cut mining. This mineralisation is open at depths below 150m.
Lars Pearl, a qualified person under National Instrument 43-101, has verified technical data disclosed in this release.
ON BEHALF OF THE BOARD OF DIRECTORS
Cosme Maria Beccar Varela, President and CEO
CAUTION REGARDING FORWARD LOOKING STATEMENTS
Information in this news release that is not a statement of historical fact constitutes forward-looking information. Such forward-looking information includes statements regarding the Company's planned exploration programs. Actual results, performance or achievements of the Company may vary from the results suggested by such forward-looking statements due to known and unknown risks, uncertainties and other factors. Such factors include, among others, that the business of exploration for tin and other precious and base minerals involves a high degree of risk and is highly speculative in nature; few properties that are explored are ultimately developed into producing mines; geological factors; the actual results of current and future exploration; changes in project parameters as plans continue to be evaluated, as well as those factors disclosed in the Company's publicly filed documents.
There can be no assurance that any mineralisation that is discovered will be proven to be economic, or that future required regulatory licensing or approvals will be obtained. However, the Companybelieves that the assumptions and expectations reflected in the forward-looking information are reasonable. Assumptions have been made regarding, among other things, the Company's ability to carry on its exploration activities, the sufficiency of funding, the timely receipt of required approvals, the price of tin and other precious and base metals, that the Company will not be affected by adverse political events, the ability of the Company to operate in a safe, efficient and effective manner and the ability of the Company to obtain further financing as and when required and on reasonable terms. Readers should not place undue reliance on forward-looking information.
Alphamin does not undertake to update any forward-looking information, except as required by applicable laws.
NOTES -DRILLING
Drilling results are quoted as downhole intersections. True mineralisation width is approximately 80% of intersection length for all holes. The reported grades were determined using a cut-off grade of 0.1% Sn, 1g/t Ag, 0.1% Zn, 0.1% Pb and 0.1% Cu to select significant and anomalous intersections, with a maximum of 3m internal dilution being incorporated into the composite where appropriate. A top cut of 60% was applied to Sn, 30% to Zn and 20% to Pb.
Half core samples for drillholes BGC003 and BGH003, 4A and 4 were submitted to accredited ALS Chemex laboratory in Johannesburg where samples were analyzed using ME-XRF05 conducted on a pressed pellet with 10% precision and an upper limit of 10 000ppm. Over limit samples were sent to Vancouver for ME-XRF10 which uses a Lithium Borate 50:50 flux with an upper detection limit of 60% and precision of 5%. ME-ICP61, HF, HNO3, HCL04 and HCL leach with ICP-AES finish was used for 33 elements including base metals. ME-OG62 a four acid digestion was used on ore grade samples for Pb, Zn, Cu & Ag. Holes BGC001, BGC002 & BGH001 were also assayed for Au using fire assay on 30g samples with AAS finish. Industry accepted QA/QC checks were applied including use of duplicates and standards.
To see Figure 1 regarding the location of drill holes with main tin intervals and inferred mineralisation please select the following link:
http://media3.marketwire.com/docs/402afm1.jpg
To see Figure 2 regarding zinc in soil anomaly along the Bisie ridge showing artisanal workings (blue) and drill hole collar positions (red dots) please select the following link:
/image%2F0689164%2F20140730%2Fob_11ac77_img-6831.jpg)
